| Beschleuniger |
Beschleuniger |
|
HERA e-- Rotator |
| Magnetname |
Magnetname |
Maßeinheit |
BA |
| |
|
|
|
| |
vorhandene Stückzahl
/ davon eingebaut |
St. |
7 / 6
|
| outer width incl. coil |
Gesamtbreite incl. Spule in (m) |
m |
|
| field per current (no saturation) |
|
T/A |
1.5607E-5 |
| dI/dE
for
nominal deflection angle |
|
A/GeV |
|
| integrated field per current (no saturat.) |
|
Tm/A |
|
| |
Verantw. Datenpfleger |
|
N.N. |
| corresponding max. energy (no saturat.) |
|
GeV |
50 |
| maximum field (if no saturation) |
max. Feld in Tesla in (T) |
T |
0.1753 |
| |
Feld am Sollkreis B in (T) bei 1170A |
T |
|
| |
Feld am Bezugskreis B in (T) |
T |
|
| gap height |
Gaphöhe in (mm) |
mm |
80.5 |
| gap width |
Gapweite in (mm) |
mm |
250 |
| good field region dB/B < 4.E-4 |
|
mm |
140
x 80 |
| maximum field gradient |
|
T/m |
|
| outer height incl. Coil |
Gesamthöhe incl. Spule in (m) |
m |
|
| coil inductance |
Spuleninduktion in (H) |
H |
?? |
| water pressure |
Wasserdruck in (bar) |
bar |
0.1 |
| cooling water temperature rise |
Temperaturanstieg in (°C) |
°C |
|
| water flow |
Wasserfluß in (l/sec) |
l / sec |
0.092 |
| |
Wasserfluß bei 4 bar in (l/min) |
l/min |
|
| |
Wasserfluß bei 6 bar in (l/min) |
l/min |
|
| |
Wasserfluß bei 8 bar in (l/min) |
l/min |
|
| |
Wasserfluß bei 12 bar in (l/min) |
l/min |
|
| magnetic
length |
mag.
Länge in (m) |
m |
4.4814 |
| outer lenght incl. coil |
Gesamtlänge incl. Spule in (m) |
m |
4.811 |
| yoke lenght |
Jochlänge in (mm) |
mm |
|
| power at maximum current |
Verlustleistung bei Nennstrom |
kW |
3.84 |
| number of magnets in HERA |
|
|
2 |
| number of windings per pole |
Windungsanzahl pro Pol |
|
0.5 |
| |
Windungsläge pro Spule in (m) |
m |
|
| |
Anzahl der Spulen |
|
|
| coil resistance at 50 C |
Spulenwiderstand bei 50 °C in (mOhm) |
mOhm |
0.029E-3 |
| |
Spulenwiderstand bei 20 °C in (mOhm) |
mOhm |
|
| |
Magnetwiderstand |
mOhm |
|
| designed to be installed at |
|
|
HERA
e- rotator |
| conductor cross section |
Leiterquerschnitt in (mm*mm) |
mm*mm |
48
x 38 |
| inverse bending radius |
|
1/m |
1.0520E-3 |
| saturation at 30 GeV |
|
% |
|
| saturation at 50 GeV |
|
% |
|
| conductor material |
Leitermaterial |
|
Cu |
| current density at max. current |
max. Stromdichte in (A/m*m) |
A/m*m |
6.51 |
| maximum current |
Nennstrom in (A) |
A |
11550 |
| |
Nennstrom eff. in (A) |
|
| current at 1% saturation |
|
A |
|
| current at 2% saturation |
|
A |
|
| magnet type |
Magnettyp |
|
dipole |
| coil weight |
Spulengewicht in (t) |
t |
0.3 |
| total weight |
Gesamtgewicht in (t) |
t |
2.9 |
| yoke weight |
Gewicht Jochkörper in (t) |
t |
2.6 |
| deflecting angle |
Ablenkwinkel |
mrad |
4.7145 |
| |
Anzahl der Kühlkreise |
|
|
| |
Spannung in (V) |
V |
|
| |
Frequenz in (Hz) |
Hz |
|
| |
Spulenquerschnitt in (mm*mm) |
mm*mm |
|
| |
Prüfdruck der Spulen in (bar) |
bar |
|
| |
Prüfspannung der Spulen in (kV) |
kV eff. |
|
| |
Isolationswiderstand
der Spulen gegen Masse in (MOhm) |
MOhm |
|
| |
Remanenz
nach Nennlast |
T |
|
| |
Datenblatt |
|
4 97 6550/0.047 |
| |
Farbe Jochköper |
RAL |
RAL3015 hellrosa |
| |
DESY-Spezifikation |
|
|
| |
Hersteller Spulen |
|
Tesla |
| |
nach Zeichnungsnr. |
|
|
| |
Hersteller Jochkörper |
|
Tesla |
| |
nach Zeichnungsnr. |
|
|
| |
Firma Zusammenbau |
|
Tesla |
| |
nach Zeichnungsnr. |
|
|
